$PBExportHeader$w_fj_fileadd.srw
forward
global type w_fj_fileadd from w_publ_base
end type
type cb_save from uo_xls_imflatbutton within w_fj_fileadd
end type
type dw_fileedit from datawindow within w_fj_fileadd
end type
type ln_bar2 from line within w_fj_fileadd
end type
type ln_bar from line within w_fj_fileadd
end type
type r_bar from rectangle within w_fj_fileadd
end type
end forward

global type w_fj_fileadd from w_publ_base
integer width = 2734
integer height = 976
string title = "文件上传"
boolean minbox = false
windowtype windowtype = response!
event ue_selectfile ( )
cb_save cb_save
dw_fileedit dw_fileedit
ln_bar2 ln_bar2
ln_bar ln_bar
r_bar r_bar
end type
global w_fj_fileadd w_fj_fileadd

type variables
s_fileinfo s_file

boolean import = false
boolean success = false

uo_fileview obj_fileview


Transaction Transaction_pic

long originallyheight,originallywidth


end variables

forward prototypes
public subroutine wf_priview ()
public function long wf_getfiledata (string arg_filepath, ref blob arg_filedata, ref string arg_msg)
end prototypes

event ue_selectfile();// //ue_selectfile
String Pathname,Filename,FileType
Integer i
Long row
row = 1 //dw_fileedit.getrow( )
FileType = ''
FileType = '所有文件(*.*),*.*,'

//	FileType += "配置文件(*.ini), *.ini," 
FileType += "Zip压缩文件(*.Zip),*.Zip,"
FileType += "RAR压缩文件(*.rar),*.rar,"
//	FileType += "XML文件(*.xml),*.xml," 
FileType += "文本文件(*.txt),*.txt,"
FileType += "Excel模版(*.xlt),*.xlt,"
//	FileType += "Excel文档(*.xls),*.xls," 
//	FileType += "Word模版(*.dot),*.dot," 
FileType += "Word文档(*.doc),*.doc,"
FileType += "JPG(*.JPG),*.JPG,"
FileType += "位图文件(*.bmp),*.bmp,"
FileType += "GIF文件(*.GIF),*.GIF"

i = GetFileOpenName("请选择文件", Pathname,Filename, "All", FileType)
IF i = 1 And Trim(Pathname) <> '' And Trim(Filename) <> "" THEN
	IF Pathname = '' Or Not FileExists(Pathname) THEN
		MessageBox('提示','请选择文件!',information!,OK!)
		success = False
		import = False
		RETURN
	END IF
	IF FileLength(Pathname)/1024 > 10240 THEN
		//			messagebox('提示','附件文件大小不得大于10M',information!,OK!)
		IF MessageBox ("询问","附件文件大小大于10M，是否继续?",question!,yesno! ) = 2 THEN RETURN
		
	END IF
	dw_fileedit.Object.filepath[row] = Pathname
	Long poi = 0,Begin = 1
	Begin = Pos(Filename,'.',1)
	DO WHILE Begin > 0
		poi = Begin
		Begin = Pos(Filename,'.',Begin + 1)
	LOOP
	IF poi > 0 THEN
		dw_fileedit.Object.Filename[row] = Mid(Filename,1,poi -1)
		dw_fileedit.Object.DisplayName[row] = Mid(Filename,1,poi -1)
		dw_fileedit.Object.FileType[row] = Mid(Filename,poi +1,Len(Filename) - poi)
	ELSE
		dw_fileedit.Object.Filename[row] = Filename
		dw_fileedit.Object.DisplayName[row] = Filename
		dw_fileedit.Object.FileType[row] = ''
	END IF
END IF
//wf_priview()
dw_fileedit.Object.filesize[row] = FileLength(Pathname)/1024

end event

public subroutine wf_priview ();//IF cbx_pv.Checked THEN
//	String arg_msg
//	String Pathname
//	String Filename
//	Pathname = dw_fileedit.Object.filepath[dw_fileedit.GetRow()]
//	Filename = dw_fileedit.Object.Filename[dw_fileedit.GetRow()]
//	
//	IF wf_getfiledata(Pathname,s_file.filedata,arg_msg) <> 1 THEN
//		MessageBox('系统提示',arg_msg)
//		RETURN
//	END IF
//	
//	IF NOT IsValid(obj_fileview) THEN
//		obj_fileview = CREATE uo_fileview_pic
//		OpenUserObject(obj_fileview)
//	END IF
//	
//	IF obj_fileview.of_showfile( s_file.filedata,Filename, arg_msg) <> 1 THEN
//		IF IsValid(obj_fileview) THEN
//			CloseUserObject(obj_fileview)
//		END IF
//		THIS.Height = THIS.originallyheight
//		THIS.Width = THIS.originallywidth
//		cbx_pv.Checked = FALSE
//		MessageBox('系统提示',arg_msg)
//		RETURN
//	END IF
//	
//	THIS.Height = obj_fileview.ii_screenheight - 570
//	THIS.Width = obj_fileview.ii_screenwidth
//	obj_fileview.X = 0
//	obj_fileview.Y = dw_fileedit.Y + dw_fileedit.Height+10
//	obj_fileview.Width = THIS.Width - 20
//	obj_fileview.Height = THIS.Height - obj_fileview.Y
//	obj_fileview.OriginalSize = cbx_originalsize.Checked
//	
//	
//	THIS.X = 0
//	THIS.Y  = 0
//	obj_fileview.of_setfilesize( )
//ELSE
//	IF IsValid(obj_fileview) THEN
//		CloseUserObject(obj_fileview)
//	END IF
//	THIS.Height = THIS.originallyheight
//	THIS.Width = THIS.originallywidth
//	wf_movetocenter()
//END IF
//
//
//RETURN
//
//
//
//
//
end subroutine

public function long wf_getfiledata (string arg_filepath, ref blob arg_filedata, ref string arg_msg);
Long rslt = 1,i
Long ll_fileLength,li_FileNum,loops,bytes_read
Blob b,temp
IF arg_filepath = '' Or Not FileExists(arg_filepath) THEN
	rslt = 0
	arg_msg = '文件'+arg_filepath+'不存在'
	GOTO ext
END IF
ll_fileLength = FileLength(arg_filepath)
IF ll_fileLength = 0 THEN
	rslt = 0
	arg_msg = '文件'+arg_filepath+'没有内容'
	GOTO ext
END IF
li_FileNum = FileOpen(arg_filepath, StreamMode!, Read!, LockRead!)

IF ll_fileLength > 32765 THEN
	IF Mod(ll_fileLength, 32765) = 0 THEN
		loops = ll_fileLength/32765
	ELSE
		loops = (ll_fileLength/32765) + 1
	END IF
ELSE
	loops = 1
END IF
IF li_FileNum = -1 THEN
	rslt = 0
	arg_msg = '读取文件'+arg_filepath+'出错，文件可能正在被使用'
	GOTO ext
END IF
FOR i = 1 To loops
	bytes_read = FileRead(li_FileNum, b)
	IF bytes_read < 0 THEN
		rslt = 0
		arg_msg = '读取文件'+arg_filepath+'出错'
		GOTO ext
	END IF
	
	temp = temp + b
NEXT
FileClose(li_FileNum)
arg_filedata = temp
rslt=ll_fileLength

ext:
RETURN rslt


end function

on w_fj_fileadd.create
int iCurrent
call super::create
this.cb_save=create cb_save
this.dw_fileedit=create dw_fileedit
this.ln_bar2=create ln_bar2
this.ln_bar=create ln_bar
this.r_bar=create r_bar
iCurrent=UpperBound(this.Control)
this.Control[iCurrent+1]=this.cb_save
this.Control[iCurrent+2]=this.dw_fileedit
this.Control[iCurrent+3]=this.ln_bar2
this.Control[iCurrent+4]=this.ln_bar
this.Control[iCurrent+5]=this.r_bar
end on

on w_fj_fileadd.destroy
call super::destroy
destroy(this.cb_save)
destroy(this.dw_fileedit)
destroy(this.ln_bar2)
destroy(this.ln_bar)
destroy(this.r_bar)
end on

event open;call super::open;s_file = Message.PowerObjectParm

Long ll_i_row
ll_i_row = dw_fileedit.InsertRow(0)
dw_fileedit.SetFocus()
dw_fileedit.SetColumn('displayname')

this.triggerevent( 'ue_selectfile') 



end event

event close;call super::close;

if not success  then
//s_file.classid = 0
s_file.fileid = 0
s_file.filename = ''
s_file.dscrp = ''
s_file.encrypted = 0
s_file.compressed = 0
s_file.filetype = ''

	setnull(s_file.filedata )
end if
CloseWithReturn(THIS,s_file)
end event

event ue_before_open;call super::ue_before_open;s_file = message.powerobjectparm

IF Not IsNull(s_file.sqltransaction ) THEN
	
	Transaction_pic = s_file.sqltransaction
ELSE
	MessageBox('提示','没有数据库事务',information!,OK!)
	Close(This)
	RETURN
END IF


this.originallyheight = this.height
this.originallywidth = this.width

dw_fileedit.settransobject( Transaction_pic)

DataWindowChild  dw_c
 dw_fileedit.getchild( "classid", dw_c)
 dw_c.settransobject( sqlca)
 dw_c.retrieve( )





end event

event resize;call super::resize;ln_bar.endx = this.width
ln_bar2.endx = this.width

r_bar.width = this.width
end event

type cb_func from w_publ_base`cb_func within w_fj_fileadd
boolean visible = false
integer x = 3099
integer y = 744
end type

type cb_exit from w_publ_base`cb_exit within w_fj_fileadd
integer x = 151
integer width = 151
integer height = 164
string text = "取消"
integer picsize = 16
toolbaralignment pic_align = alignattop!
boolean border = false
boolean havefocusrect = false
end type

event cb_exit::clicked;success = false
close(parent)
end event

type cb_save from uo_xls_imflatbutton within w_fj_fileadd
integer width = 151
integer height = 164
integer taborder = 50
boolean bringtotop = true
string text = "上传"
string normalpicname = "save.bmp"
integer picsize = 16
toolbaralignment pic_align = alignattop!
boolean border = false
boolean havefocusrect = false
end type

event clicked;Long row,rt_fileid
uo_fj_mng_billtype ls_uo_btfj
ls_uo_btfj= create uo_fj_mng_billtype
dw_fileedit.AcceptText( )
String arg_msg
row = dw_fileedit.GetRow( )
IF row <= 0 THEN RETURN
String filepath
s_file.Filename = dw_fileedit.Object.Filename[row]
s_file.FileType = dw_fileedit.Object.FileType[row]
s_file.opemp = publ_operator
s_file.opdate = DateTime(Today())
//s_file.encrypted = dw_fileedit.Object.encrypted[row]
//s_file.compressed = dw_fileedit.Object.compressed[row]
//s_file.classid = dw_fileedit.Object.classid[row]
s_file.dscrp = dw_fileedit.Object.dscrp[row]
s_file.DisplayName = dw_fileedit.Object.DisplayName[row]


filepath = dw_fileedit.Object.filepath[row]

IF s_file.Filename = '' THEN
	MessageBox('提示','请输入文件名称',information!,OK!)
	dw_fileedit.SetColumn('Filename')
	dw_fileedit.SetFocus( )
	RETURN
END IF
IF s_file.DisplayName = '' THEN
	MessageBox('提示','请输入档案名称',information!,OK!)
	dw_fileedit.SetColumn('DisplayName')
	dw_fileedit.SetFocus( )
	RETURN
END IF
IF filepath = '' THEN
	MessageBox('提示','请选择文件',information!,OK!)
	dw_fileedit.SetColumn('b_ch')
	dw_fileedit.SetFocus( )
	RETURN
END IF

IF wf_getfiledata(filepath,s_file.filedata,arg_msg) <=0 THEN
	MessageBox('错误',arg_msg,stopsign!,OK!)
	RETURN
END IF

if ls_uo_btfj.uf_save_fj( s_file, rt_fileid, Transaction_pic , arg_msg )=1 then

	MessageBox('提示',"更新文件成功",information!,OK! )
	Close(Parent)
	RETURN
ELSE
	MessageBox('错误','请重试>'+arg_msg,stopsign!,OK!	)	
	RETURN
END IF

end event

type dw_fileedit from datawindow within w_fj_fileadd
integer y = 184
integer width = 2665
integer height = 660
integer taborder = 20
boolean bringtotop = true
string title = "none"
string dataobject = "dw_fj_file_edit"
boolean livescroll = true
borderstyle borderstyle = stylelowered!
end type

event clicked;IF dwo.Name = 'b_ch' THEN

	parent.triggerevent( 'ue_selectfile') 

END IF




end event

type ln_bar2 from line within w_fj_fileadd
long linecolor = 16777215
integer linethickness = 4
integer beginy = 172
integer endx = 2039
integer endy = 172
end type

type ln_bar from line within w_fj_fileadd
long linecolor = 268435456
integer linethickness = 4
integer beginy = 168
integer endx = 2469
integer endy = 168
end type

type r_bar from rectangle within w_fj_fileadd
long linecolor = 16777215
integer linethickness = 4
long fillcolor = 1073741824
integer x = 1531
integer width = 146
integer height = 68
end type

event constructor;this.fillcolor = 14215660
this.linecolor = 14215660
this.x = -1
this.y = -1
this.height = ln_bar.beginy - 5

end event